Warenkorb

Ihr Warenkorb ist leer

Ihr Warenkorb ist leer

C-Typ-Klemme Flexibles SchwanenhalsLicht 900 Lumen Led Arbeitslicht mit für Drehmaschine Cnc-Fräsbohrmaschine Nähmaschine Industrielle Beleuchtung Werkzeug Maschinenleuchte (9W C-Typ-Klemme)

Kostenloser Versand ab 25.99€

49.99€

25 .99 25.99€

Auf Lager

1.Größe:5w Magnetische Basis


Info zu diesem Artikel

  • IP65 wasserdicht: LED Arbeitslicht besteht aus hochwertigem Aluminium legierungs lichtkopf, zusätzlichem wasserdichtem Gummiring, es kann vor dem von der Maschine erzeugten Wasserstrahl schützen. 
  • Leistung und Spannung: Eingangsspannungsbereich ist 110 bis 240V, kann natüirlich 120V eingeben; Drei LEDs, Lichtstrom 9w ist 900 Lumen, längere Lebensdauer als Halogen lampen, mehr Energieeinsparung.
  • Flexibler Schwanenhals: flexibler Metallschlauch und Kunststoffrohr, etwa 20 Zoll lang, kann die Richtung der Beleuchtung 360° einstellen.
  • Einfache Installation: Das Arbeitslicht ist mit einem Metall G (C) Klemmsockel ausgestattet, Es kann am Rand von Tischen, Holzbrettern, Eisenplatten und Maschinen geklemmt werden. Die maximale Dicke kann auf 55mm(2.2inch) geklemmt werden
  • Anwendungsbereich: Geeignet für alle Arten von Werkzeuqmaschinen, wie CNc, Stanzen, Drehmaschine Bohrmaschine,Autowerkstatt, Ausrüistung, Maschinenwerkstatt Holzbearbeitungs-Werkbank, Nahmaschine



Produktinformation

Spezifikation:

Alias ​​:Led Arbeitslampe / Led Spotlicht / Flexibles Schwanenhalslicht

Modell:6006-MKJ-DE-G

Lampenmaterial: Metall

Leistung: 9W

Lichtstrom: 900 Lumen

Farbtemperatur: 6000K

Leben: mehr als 100.000 Stunden

Eingangsspannungsbereich: AC110 ~ 220V

Schwanenhalslänge: Ca 20 Zoll

Installationsart: stark magnetisch

Schaltertyp: Druckschalter

Schalterstellung: Lampenkopf

Netzkabellänge:Ca 50 Zoll

Steckertyp: EU-Stecker

Eine breite Palette von Anwendungen, einschließlich CNC, Drehmaschinen, Fräsmaschinen, Bohrmaschinen, Holzbearbeitung, Werkbank, Nähmaschine, Autoreparaturwerkstatt und anderen Szenarien.


matthias
5. Juli 2025
Das ist eine super Arbeitsleuchte, sehr universell einsetzbar und vor allem sehr hell, und Punkt genau einsetzbar. Zudem besteht hier eine unübertroffenes Preis Leistungs Verhältnis. Kurz um, , sehr zu empfehlen.
Kunde
21. Juni 2025
Schöner, kräftiger Magnet. Die Lampe fällt auch unter Vibrationen nicht von der Maschine oder wandert, wenn sie seitlich angebaut ist. Die Leuchtkraft ist für kleine Arbeitsplätze, wie beim Nähen, Basteln, Modellbau ausreichend. Das Kabel könnte durchaus etwas länger sein.
Peter Schlüter
19. Juni 2025
Habe die Lampe bei mir im Hobbykeller und an den Stellen, wo es mal drauf ankommt, kräftiges Licht zu haben, welches ich auch mal direkt über das Werkstück machen kann, erfüllt sie mehr als ausreichend ihren Zweck. Der bewegliche Arm macht das Einstellen der Lampe über den Werkstück sehr einfach.
Peter Herttrich
11. Juni 2025
Das Teil sollte an einer Ständerbohrmaschine zum Einsatz kommen.1. Das 'Käbelchen' ist viel zu kurz.2. Das Käbelchen kommt seitlich aus dem Netzteil raus. so dass die Nachbarsteckdose nicht mehr nutzbar ist.3. Das Netzteil ist nicht abschaltbar. Auch bei abgeschalteter Lampe fliesst Strom. NoGo!4. Der Magnet ist viel zu schwach. Bei seitlicher Führung der Lampe kippt er weg. Unbrauchbar.5. Die ausgeleuchtete Fläche ist ausreichend aber nicht gut. Bei runtergefahrenem Tisch wird es unzureichend.6. Keine Kaufempfehlung. Werde das Teil für was anderes verwenden.
Ralf
6. Juni 2025
Die Lampe an sich ist gut, macht ordentlich Licht, die Befestigung ist gut zu gebrauchen. Was weniger gut ist/war die Verpackung nichts war an sein Platz, alles im Paket war durcheinander. Ein bisschen Papier dazwischen wäre gut gewesen.
Privat
24. Mai 2025
Artikel hält genau, was versprochen wird. Rasche, komplette Lieferung. Preis/Leistung passt. Würde ich wieder kaufen!
Peter Schuster
13. Mai 2025
Sehr hell, haftet gut auf metallischen Flächen, nur der winzige Schalter könnte etwas größer und griffiger ausfallen, ansonsten sehr preiswert !
Ulrike
5. Mai 2025
Die Lampe hist sehr hell, leider ist die Verarbeitung nicht gerade berauschend. 1x etwas abgedreht, da löste sich schon der Deckel vom Fuss.
Ray Robinson
1. April 2025
To be used promarily for occasional metal lathe operations...the magnet held fast and stable on all substantial ferrus metal surfaces strongly...however, the quite heavy light head (presumably because of the the COB system heat sink) would cause the gooseneck to undo itself from the magnet. One simple way to remedy this would be for the supplier to provide a star locking washer as well as the standard plain washer for a more stable fixing or for the user to apply a little thread locker fluid on the gooseneck for the same purpose. There could be an issue also with stray cutting fluid getting into the switch and COB head through ventilation slots causing a short circuit - particularly not very good as mains power goes into the COB via the rocker switch - I suppose the answer here is to be careful not to allow stray fluid to get anywhere near the electrics, that could be better provided by making the gooseneck just a little longer say another 6" (150mm) - the light is powerful enough for most work even at the lowish quoted wattage and positioning the light head is a breeze - a nice product - recommended - how well this light performs in six months time will be interesting
Christopher J Taylor
16. März 2025
I bought this to fit to a new lathe. The lamp stem is very flexible and the light level is excellent. I made a more rigid mounting bracket than the one provided, but I could have used the original one. A good value and versatile work light.
Andrew Rowley
10. März 2025
Quality is reasonable, although the light is not as bright as I would have hoped. A bit disappointed that irt only has 800mm cable length meaning I need to also use an extension lead. Not the end of the world, but would have expected a minimum length of 2 metres. Delivery was very quick.
ninjapaddidavinci
28. Februar 2025
Good build quality, good price and very fast delivery. I use it on my bench drill and find that it provides ample light exactly where I need it. My sight is impaired by AMD so good lighting is important to me.
Sam
20. Dezember 2024
Needed a new work light for my workbench. This was the cheapest I could find. Don’t get me wrong this isn’t the highest quality ever but the light is extremely bright, it’s really handy having the on and off button on the head of the light, it seems to have a strong bendy shaft that will stay in place to where you move it. The only two things I don’t like is the power cable is very thin (fairly long but just a very thin) and the plug is very cheap looking and rattles. But overall I can’t knock its performance.
Produktempfehlungen

79.95€

34 .99 34.99€

4.8
Option wählen